Adaptors for expansible chucks: they are necessary when on the same shaft you want to make run reels of different diameters either in winding or unwinding movement.

So the increases are adapted to the diameter of the chuck through a internal hole and to get different outside diameters.

The expansion is obtained by means of the chuck on which is mounted the adaptor.

In the case of use of different diameters of cores, it is possible to provide interchangeable adapters to be mounted in just one chuck basis.

Standard sizes available for this Model are listed on the download-sheet, but are available in other sizes for a custom order.

Contact your SVECOM representative for details.



-Core diameter from 70 to 600 mm.
-Chuck length 210 mm.
-Expansion range 10/12 mm.
-Air pressure min. 5 bar (suggested 6 bar)
*Contact your SVECOM representative for Non-Standard requirements.