714 MZ-C – Pneumechanical expanding chucks with lugs

Description

The Model 714/MZ-C is recommended primarily for unwinding, where perfect centring is needed.

It can also be used for winding and rewinding, and is superior for higher weight, speed, and torque requirements. The body of the chuck and the expanders (lugs) are available in steel only. The chuck is available in flange or shaft extension type mountings. Expansion is accomplished by one (or more) air activated pistons that mechanically engage the expanders. Expansion can be spring activated to grant core is gripped also in case of air leakage in the machine. When running different core diameters, suitable interchangeable adaptors can be fitted onto one base chuck.

Standard sizes available for this Model are listed below.

 

 

Features

Core diameter: from 70 to 600 mm

Chuck length: 210 mm

Expansion range: 10/12 mm on diameter

Air pressure: min. 5 bar (suggested 6 bar)

 

Contact SVECOM for Non-Standard requirements.

Do you want to receive more information on this product?




Information pursuant to art. 13 Regulation (EU) 679/2016. The data provided with the completion of this information request form will be processed and printed. Your data will be used exclusively to respond to your specific requests. Your data will not be communicated or disclosed to third parties. The data controller is Svecom-P.E. to which you can apply for the exercise of the rights referred to in Article 15 of Regulation (EU) 679/2016. To view the full information, refer to the privacy page .