Pneumatic expanding tire chucks mod. 715 PG

Description

Pneumatic expanding tire chuck mod. 715 PG is recommended for unwinding and rewinding with cores.

The body of the expanding chuck can be either light alloy or steel, whereas the expanding section is made of a high-resistance rubber band. Itis available with side flange for mobile arms unwind stand mounting, or with a passing bore for passing bars mounting. The steel clamp grants a perfect gripping onto the bar and can be replaced with fixing grains to reduce the weight. To get better performances in load capacity and transmissible torque, two or more715/PG chucks can be connected in series and fed by one inflation air valve. Expansion is accomplished by one only rubber band which once inflated exerts a direct pressure onto the core. It is mandatory to inflate the chuck only when the reel is inserted.

Standard sizes available for this Model are listed below.

Require an estimate

Features

Core diameter: from 70 to 400 mm

Rubber tyre length: approx. 90 mm

Expansion range: 12 mm

Air pressure: min. 5 bar (suggested 6 bar)

 

Contact your SVECOM representative for Non-Standard requirements.

Download pdf file

Do you want to receive more information on this product?




    YesNo







    I declare to have read and understood the informative of the art 13 Regulation (EU) 679 and I authorize the treatment of my personal data *

    Subscribe to the newsletter

    Information pursuant to art. 13 Regulation (EU) 679/2016. The data provided with the completion of this information
    request form will be processed and printed. Your data will be used exclusively to respond to your specific requests.
    Your data will not be communicated or disclosed to third parties. The data controller is Svecom-P.E. to which you
    can apply for the exercise of the rights referred to in Article 15 of Regulation (EU) 679/2016. To view the full
    information, refer to the privacy
    page.