718 PH – Reel lifting expanding chucks with leaves


The Model 718/PH is recommended primary for lifting and vertical handling of reels.

It is superior for higher weights and grants a safe core gripping during lifting and transport operations. The chuck body and the expanders (lugs or leaves, depending from the application) are available in steel only. The chuck is available in flange, crane hook or shaft extension type mountings, always custom made. Expansion is accomplished by one or more springs that mechanically engage the expanders; chuck retraction is obtained pneumatically. The chuck can be stepped for use with different core sizes.


Standard sizes available for this Model are listed below.


Core diameter: from 70 to 300 mm

Chuck length: 400 mm

Expansion range: 12 mm on diameter

Air pressure: min. 5 bar (suggested 6 bar)


Contact SVECOM for Non-Standard requirements.

Download pdf file

Do you want to receive more information on this product?

Subscribe to the newsletter

Information pursuant to art. 13 Regulation (EU) 679/2016. The data provided with the completion of this information request form will be processed and printed. Your data will be used exclusively to respond to your specific requests. Your data will not be communicated or disclosed to third parties. The data controller is Svecom-P.E. to which you can apply for the exercise of the rights referred to in Article 15 of Regulation (EU) 679/2016. To view the full information, refer to the privacy page .