Mechanical safety chucks with U squared shaped and tilting ring mod. 900

Description

Mechanical safety chuck with U squared shaped and tilting ring mod. 900 is used to rewind or unwind material in rolls on expanding airshafts; they allow to load or unload rolls more easily without moving the airshaft directly.

Tilting safety chuck (tilting disc opening), there are several versions: light, heavy, ultra-heavy and with axial movement. Use with/without shaft or with handwheel; insert round/square.

Several tilting and sliding models are available to suit different loads.

Any model can be both foot-mounted and flange-mounted.

Standard sizes available for this Model are listed below.

Require an estimate

Features

Capacity Perp Pair: from 6.000 N to 60.000 N (Reel weight)
Max Torque Transmissible: from 235 Nm to 2.500 Nm
Max Speed: from 300 RPM to 1.000 RPM
Square Standard Socket: from □ 25-30 to □ 60-80
Standard Shaft Diameter: from Ø 25-30 to Ø 50-60

Contact SVECOM for Non-Standard requirements.

Download pdf file

SERIES	CAPACITY PERP PAIR	MAX TORQUE	FIXING	USING	SQUARE MEASURE	COUPLING	TYPE
900 light	6.000 N	235 Nm	Flange	With or Without Shaft	25-30	Square/Square	KLLF1-0
900 light	6.000 N	235 Nm	Foot	With or Without Shaft	25-30	Square/Square	KLLP1-0
900 heavy	15.600 N	1.000 Nm	Flange	With or Without Shaft	30-50	Square/Square	KLPF1-0
900 heavy	15.600 N	1.000 Nm	Foot	With or Without Shaft	30-50	Square/Square	KLPP1-0
900 extra heavy	60.000 N	2.500 Nm	Flange	With or Without Shaft	60-80	Square/Square	KLUF1-0
900 extra heavy	60.000 N	2.500 Nm	Foot	With or Without Shaft	60-80	Square/Square	KLUP1-0
900 axial movement	15.600 N	1.000 Nm	Flange	With Shaft	40	Square/Square	KLSF1
900 axial movement	15.600 N	1.000 Nm	Flange	With Handwheel	40	Square/Square	KLSF2
900 axial movement	15.600 N	1.000 Nm	Foot	With Shaft	40	Square/Square	KLSP1
900 axial movement	15.600 N	1.000 Nm	Foot	With Handwheel	40	Square/Square	KLSP2

LEGEND:

KL= Safety Chuck (Mechanical), L = Light, P = Heavy, U = Extra Heavy, A = Air Inlet, S = Axial Movement, F = Flange, P = Foot, 0 = Without Shaft, 1 = With Shaft, 2 = With Handwheel

Do you want to receive more information on this product?

I declare to have read and understood the informative of the art 13 Regulation (EU) 679 and I authorize the treatment of my personal data *

I want to subscribe to the newsletter

Information pursuant to art. 13 Regulation (EU) 679/2016. The data provided with the completion of this information request form will be processed and printed. Your data will be used exclusively to respond to your specific requests. Your data will not be communicated or disclosed to third parties. The data controller is Svecom-P.E. to which you can apply for the exercise of the rights referred to in Article 15 of Regulation (EU) 679/2016. To view the full information, refer to the privacy page .